-
F4 Non-Rising Stem Resilient Gate Valve-MSize: DN40-DN600. Operation: Hand wheel. Working pressure: PN16. Temperature Range: -15°C - 80°C. Face to Face: DIN3202-F4. Flange drilled: DIN2501 PN10/16.read more
-
F4 Non-Rising Stem Resilient Gate Valve-LSize: DN40-DN300. Operation: Hand wheel. Working pressure: PN16. Temperature Range: -15°C - 80°C. Face to Face: DIN3202-F4. Flange drilled: DIN2501 PN10/16.read more
-
F4 Non-Rising Stem Resilient Gate Valve-HDescription The gate of F4 Non-Rising Stem Resilient Gate Valve is made of EPDM or NBR coating, and the valve body is made of epoxy resin coating. The distinguishing feature of this gate valve isread more
-
Resilient Gate Valve Hot WaterSize: DN50-DN300. Operation: Hand wheel. Working pressure: PN16. Temperature Range: 0 °C - 150°C. Face to Face: DIN3202-F4. Flange drilled: DIN2501 PN10/16.read more
-
BS5163 Non Rising Stem Resilient Gate ValveSize: DN40-DN600. Operation: Hand wheel. Working pressure: PN10/16. Temperature Range: -15°C - 80°C. Face to Face: BS 5163. Flange drilled: EN 1092 ISO PN10/16. Hydraulic Pressure Test: Shell test atread more
-
Big Size Resilient Soft Seated Gate ValveSize: DN350-DN1000. Operation: Hand wheel/Worm gear/Electric actuator. Working pressure: PN10/16. Temperature Range: 0 °C - 100 °C. Face to Face: BS5163/DIN3202-F4. Flange drilled: BS 4504read more
-
Cast Iron Wedge Gate ValveSize: DN40-DN800. Operation: Hand wheel. Working pressure: PN10. Temperature Range:0 °C - 200 °C. Face to Face: BS 5163/GOST 12815-80. Flange drilled: PN10.read more
-
Cast Steel Gate ValveSize: DN50-DN600. Operation: Hand wheel. Working pressure: PN16. Temperature Range: -46 °C - 400 °C. Face to Face: GOST 12815-80. Flange drilled: GOST 33259-2015 PN16.read more
-
Wafer Knife Gate ValveSize: DN50-DN1000. Operation: Hand wheel/Worm gear. Temperature Range: 0 °C - 80 °C.read more
WebA gate valve is the most common valve for water supply systems. It represents a linear-motion isolation valve and has a function to stop or allow the flow. Gate valves got their name from the...
WebPVC Gate Valves, Spigot Designed for quick shutoff in low-pressure or vacuum lines, these quick-opening valves provide unrestricted flow for low-pressure tank and drain applications with liquids,...
WebGate valves, also called sluice valves, usually involves a round knob attached to a sillcock that, when turned, lowers or raises an internal gate or wedge to control the water flow rate. The...
WebAF-41 Aluminum Flap Gates SSF-41 Stainless Steel Flap Gates F-10 Cast Iron Flap Gates PF-25 Pump Discharge Flap Valves Drainage Gates Flap gates permit the free flow of water from a pipe or...
WebGate valves are designed as full-port valves. This means that the valve port is of the same size as the inner diameter of the connecting pipe. Full-bore gate valve passes the fluid flow without...
WebApr 15, 2020 · Gate valve is the most common type of valve in any process plant. It is a linear motion valve used to start or stop fluid flow. In service, these valves are either in the fully open...
