-
F4 Non-Rising Stem Resilient Gate Valve-MSize: DN40-DN600read more
Operation: Hand wheel
Working pressure: PN16
Temperature Range: -15°C - 80°C
Face to Face: DIN3202-F4
Flange drilled: DIN2501 PN10/16 -
F4 Non-Rising Stem Resilient Gate Valve-LSize: DN40-DN300read more
Operation: Hand wheel
Working pressure: PN16
Temperature Range: -15°C - 80°C
Face to Face: DIN3202-F4
Flange drilled: DIN2501 PN10/16 -
F4 Non-Rising Stem Resilient Gate Valve-HDescription The gate of F4 Non-Rising Stem Resilient Gate Valve is made of EPDM or NBR coating, and the valve body is made of epoxy resin coating. The distinguishing feature of this gate valve is...read more
-
Resilient Gate Valve Hot WaterSize: DN50-DN300read more
Operation: Hand wheel
Working pressure: PN16
Temperature Range: 0 °C - 150°C
Face to Face: DIN3202-F4
Flange drilled: DIN2501 PN10/16 -
BS5163 Non Rising Stem Resilient Gate ValveSize: DN40-DN600read more
Operation: Hand wheel
Working pressure: PN10/16
Temperature Range: -15°C - 80°C
Face to Face: BS 5163
Flange drilled: EN 1092 ISO PN10/16... -
Big Size Resilient Soft Seated Gate ValveSize: DN350-DN1000read more
Operation: Hand wheel/Worm gear/Electric actuator
Working pressure: PN10/16
Temperature Range: 0 °C - 100 °C
Face to Face: BS5163/DIN3202-F4... -
Cast Iron Wedge Gate ValveSize: DN40-DN800read more
Operation: Hand wheel
Working pressure: PN10
Temperature Range:0 °C - 200 °C
Face to Face: BS 5163/GOST 12815-80
Flange drilled: PN10 -
Cast Steel Gate ValveSize: DN50-DN600read more
Operation: Hand wheel
Working pressure: PN16
Temperature Range: -46 °C - 400 °C
Face to Face: GOST 12815-80
Flange drilled: GOST 33259-2015... -
Wafer Knife Gate ValveSize: DN50-DN1000read more
Operation: Hand wheel/Worm gear
Temperature Range: 0 °C - 80 °C
All spring fully open at a water temperature of 210° F or the set pressure and remain open until the system is restored below the set point. For remote discharge, valves have a threaded relief port...
As we mentioned, ball valves operate by rotating a ball 90° while gate valves are controlled by moving a gate up or down. Because of their design, ball valves can perform an almost...
1-48 of over 1,000 results for "water heater valves" RESULTS 3/4 Inch IPS Isolator Tankless Water Heater Service Valve Kit with Pressure Relief Valve, Clean Brass, 3/4 Inch Service Installation...
Gate and globe (stop) valves are prone to corrosion and generally wear out over time. Ball valves are much more durable and reliable. I've seen many, many old stop valves that are leaking or...
Gate valve seize up because in the water that circulates via the pump around the central heating system, eventually builds up of iron and scale deposits, as well as other deposits that circulates,...
Mar 05, 2015 · A shutoff valve shall be provided in the cold water supply to each water heater. If a shutoff valve is also pro- vided in the hot water supply from the heater, it shall not isolate any...
