-
Big Size Resilient Soft Seated Gate ValveSize: DN350-DN1000read more
Operation: Hand wheel/Worm gear/Electric actuator
Working pressure: PN10/16
Temperature Range: 0 °C - 100 °C
Face to Face: BS5163/DIN3202-F4... -
F4 Non-Rising Stem Resilient Gate Valve-LSize: DN40-DN300read more
Operation: Hand wheel
Working pressure: PN16
Temperature Range: -15°C - 80°C
Face to Face: DIN3202-F4
Flange drilled: DIN2501 PN10/16 -
F4 Non-Rising Stem Resilient Gate Valve-HDescription The gate of F4 Non-Rising Stem Resilient Gate Valve is made of EPDM or NBR coating, and the valve body is made of epoxy resin coating. The distinguishing feature of this gate valve is...read more
-
Resilient Gate Valve Hot WaterSize: DN50-DN300read more
Operation: Hand wheel
Working pressure: PN16
Temperature Range: 0 °C - 150°C
Face to Face: DIN3202-F4
Flange drilled: DIN2501 PN10/16 -
BS5163 Non Rising Stem Resilient Gate ValveSize: DN40-DN600read more
Operation: Hand wheel
Working pressure: PN10/16
Temperature Range: -15°C - 80°C
Face to Face: BS 5163
Flange drilled: EN 1092 ISO PN10/16... -
F4 Non-Rising Stem Resilient Gate Valve-MSize: DN40-DN600read more
Operation: Hand wheel
Working pressure: PN16
Temperature Range: -15°C - 80°C
Face to Face: DIN3202-F4
Flange drilled: DIN2501 PN10/16 -
Cast Iron Wedge Gate ValveSize: DN40-DN800read more
Operation: Hand wheel
Working pressure: PN10
Temperature Range:0 °C - 200 °C
Face to Face: BS 5163/GOST 12815-80
Flange drilled: PN10 -
Cast Steel Gate ValveSize: DN50-DN600read more
Operation: Hand wheel
Working pressure: PN16
Temperature Range: -46 °C - 400 °C
Face to Face: GOST 12815-80
Flange drilled: GOST 33259-2015... -
Wafer Knife Gate ValveSize: DN50-DN1000read more
Operation: Hand wheel/Worm gear
Temperature Range: 0 °C - 80 °C
Leakage through the valve can also be a safety hazard, and can be detrimental to the process. Reasons that Valves leak Common causes of leakage through the valve include.. Valve is not...
Aug 01, 2010 · The way we know he has gate valves is that they leak. In a gate valve a wedge-shaped gate is pushed down between two seats. When it wedges fully then it presses tightly...
The reason your shut off valve is dripping/leaking is because the washer inside has hardened over time, or it is covered by mineral deposits. Since these valves are rarely operated, when you...
Apr 08, 2006 · A valve should NOT be inaccessible - burying a valve behind drywall is inexcusable. If in the course of renovation the valve will become accessible, a gate valve that's leaking at...
Dec 04, 2020 · Gate valve suppliers explain how to deal with gate valve leakage. Cause of gate valve leakage 1. The medium corrodes the wedge seal ring...
Jun 23, 2020 · A malfunctioning gate valve is not difficult to repair, but it is even easier to prevent. These problems are typically caused by mineral buildup, so you should fully close and open...
