1. Open all valves to a larger size, and see which room has a higher temperature for a period of time;
2. Adjust the water valve in front of the radiator in the bedroom with a higher temperature, make it smaller, remember to adjust it, and do not adjust too much at one time; check again for a while to see which room has a higher temperature;
3. Repeat the actual operation of steps 1 and 2 until the temperature of each bedroom is in a balanced state, that is, the temperature is the same;
The two temperature control valves of the radiator are generally one in each of the left and right pipeline sewage outlets. Usually, the inner one is responsible for the power switch, and the lower one can adjust the temperature of the water. Both sides of the temperature control valve are marked with arrow symbols, and the two sides are respectively biased towards 0 and 5. Turn the temperature control valve to the side of 5. The larger the data, the higher the temperature, and the greater the total flow of boiling water.
If there is no arrow symbol and no data is obtained, it is generally turned off clockwise and turned on in the opposite direction. English letters represent, "s" is closed (shut), "o" is open (open). If it is a valve with a door handle, the one in the same direction as the pipeline is open, and the one in the vertical pipeline orientation is closed.
The temperature control valve can control how much boiling water enters the heating tube. The more the total flow of boiling water, the higher the temperature. On the contrary, the lower the temperature, how less heat is generated at one time. Usually, after the radiator is gradually applied, it is recommended to tighten it to a larger size immediately. At this time, the water output is larger, and the temperature will be raised quickly, and then gradually reduced the temperature according to the situation.
